Waxco

E08191 RUBI (BARCELONA)- SPAIN
P. I. Cova Solera - Av. Sucarrats, 100
Tel. ++34.93.586.10.10
 Fax ++34.93.586.10.12

 

MICROMOTOR NAVFRAM

Zoom

Code: 359011

NAVFRAM N-80W

  • Specially designed for use in the jewellery trade, dental and optical laboratories and all types of mechanical and artisan working due to it being easy to manipulate, power, and robustness.
  • Ergonomic design, light weight.
  • Collet chuck quarter-turn open type.
  • Easy interchangeable chuck from Ø 0 to 3,2 mm.
  • Original chuck Ø 2,35 mm.
  • Front bearing with triple protection against dust.
  • Manual speed control from 0 to 25000 rpm.
  • Non stage speed system.
  • Torque maintenance through feedback.
  • Turning ability to right or left direction.
  • Automatic protection system against overload.

Zoom

Code: 359013

NAVFRAM N-120W

  • Specially designed for use in the jewellery trade, dental and optical laboratories and all types of mechanical and artisan working due to it being easy to manipulate, power, and robustness.
  • Ergonomic design, light weight.
  • Collet chuck quarter-turn open type.
  • Easy interchangeable chuck from Ø 0 to 3,2 mm.
  • Original chuck Ø 2,35 mm.
  • Front bearing with triple protection against dust.
  • Electronic speed control from 0 to 25000 rpm.
  • Highly enlightened display.
  • Electronic torque control.
  • Turning ability to right or left direction.
  • Automatic protection system against overload.
  • Optional:
    Foot speed control: It replaces the foot on/off control. It increases speed in a nom stage system

Zoom

Code: 359032

MICROMOTOR DOUBLE HAMMER NAVFRAM N-120W

Micromotor:

  • Specially designed for jewellery and costume jewellery work.
  • Tool change by turning a lever.
  • Easy to change chucks
  • Hard aluminium body resin covered, steel axis mounted on sealed auto-greased ball bearings of the highest quality.
  • Speed 25.000 r.p.m.

Microhammer

  • Ideal for all types of settings.
  • Highly precise .
  • Force of the hammer-blow regulated by external screw.
  • Hammer frequency regulated by the potenciometer in the control box.
  • Finish in chrome and resins

Tabletop control box

  • Anti-shock resin control box with 2 electric circuit out-puts which adjust the speed independently of the force used by the tool.
  • Micromotor protection, automatic cut-out when the force is over the safety limit. Reset is by lifting foot off pedal.l.
  • Variable speed, possibility of connecting a regulating pedal .
  • Direction reverser

Pedal Speed control

Very useful for certain types of work, by using the pedal the micromotor's spped adapts to the work's requirements.

 

Code: 359100

Chucks for micromotor

  • Delivered with chuck 2,35 mm
  • Chucks available : 0 / 1 / 1,5 / 2 / 2,35 / 3 / 3,2