WAXCO DRILL PRESS

Our precision-sensitive drill presses drill materials that include steel, stainless steel, nonferrous metals, plastics, printed circuit boards and graphite, as well as diamond drilling of ceramics, sapphire and glass.

For laboratory, prototype and precision production work.

• Drill holes down to 0.002 / 0.05mm Dia.
• Spindle runout: 0.0002" / 0.005 mm TIR
• High accuracy down stop for drilling depth control
  (0.001 / 0.05mm per division)
• Variable speed spindle (200-20,000 RPM)
• Quill travel (stroke): 1.5 / 38.1mm
• Graduated dial gauge for depth control
  (0.001 / 0.05mm per division)
• Wide selection of bases and accessories
• Drill capacity:to 1/16" in inconel
  to 1/8" in steel
  to 3/16" in aluminum (collet only)

7100-M

7110-M

7130-M

7140-M

Maximum distance of chuck/collet to base

A

152 mm

330 mm

152 mm

419 mm

Throat depth
(spindle CL to column)

B

89 mm

89 mm

216 mm

239 mm

Working base area (width)

C

165 mm

165 mm

248 mm

248 mm

Working base area (depth)

D

152 mm

152 mm

324 mm

324 mm

Column diameter through head

E

31 mm

31 mm

31 mm

31 mm

Column diameter through elbow

F

-
-

-
-

-
-

41 mm

Column length

G

305 mm

483 mm

191 mm

457 mm

Footprint width

181 mm

181 mm

267 mm

267 mm

Footprint depth

299 mm

299 mm

470 mm

470 mm

Overall height

457 mm

635 mm

457 mm

749 mm

Weight

9.5 kg

9.5 kg

12.2 kg

18.1 kg

Base

Fine grain, ground cast iron base

Fly-cut cast aluminum base with fine grain cast iron offset and elbow